Valorization of granite production dust in development of rich and lean cement mortar

Journal of Material Cycles and Waste Management - Granite mining, cutting and processing generates huge amount of waste which is dumped in open landfills. The objective of this research is to...     

Levels of dechlorane plus and polybrominated diphenylethers in human milk in two Canadian cities

Flame retardant dechlorane plus (DP) and several polybrominated diphenylether (PBDE) congeners have been measured in 87 human milk samples collected in two Canadian cities: Kingston and Sherbrooke. The levels of PBDEs in human milk (mean (median), ng g^− 1 lipid weight = 10 (5.9), 4.1 (2.8), 3.0 (1.6), 5.12 (1.6), and 15 (ND) for BDE-47, BDE-99, BDE-100, BDE-153, and BDE-209, respectively) were comparable to those reported in Europe, U.S.A. and China. The levels of DP, with a mean value of 0.98 ng g^− 1 and a median value of 0.60 ng g^− 1 (lipid weight), were two to ten times lower than those of concurrently measured major PBDEs including BDE-209. While there is little difference in the levels of measured contaminants in milk samples collected from the two cities, the contaminants levels in human milk show, indicated by Principal Components Analysis, that DP, deca-BDE, and penta-BDE come from three distinct sources. The mean and median isomer ratio values of DP in milk were 0.67 and 0.69, respectively, very similar to that of DP commercial products.     

New generation Amberlite XAD resin for the removal of metal ions: A review

The direct determination of toxic metal ions, in environmental samples, is difficult because of the latter's presence in trace concentration in association with complex matrices, thereby leading to insufficient sensitivity and selectivity of the methods used. The simultaneous removal of the matrix and preconcentration of the metal ions, through solid phase extraction, serves as the promising solution. The mechanism involved in solid phase extraction (SPE) depends on the nature of the sorbent and analyte. Thus, SPE is carried out by means of adsorption, ion exchange, chelation, ion pair formation, and so forth. As polymeric supports, the commercially availableAmberlite resins have been found very promising for designing chelating matrices due to its good physical and chemical properties such as porosity, high surface area, durability and purity. This review presents an overview of the various works done on the modification of Amberlite XAD resins with the objective of making it an efficient sorbent. The methods of modifications which are generally based on simple impregnation, sorption as chelates and chemical bonding have been discussed. The reported results, including the preconcentration limit, the detection limit, sorption capacity, preconcentration factors etc., have been reproduced.     

Use of recycled plastic in concrete: a review

Numerous waste materials are generated from manufacturing processes, service industries and municipal solid wastes. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. Solid waste management is one of the major environmental concerns in the world. With the scarcity of space for landfilling and due to its ever increasing cost, waste utilization has become an attractive alternative to disposal. Research is being carried out on the utilization of waste products in concrete. Such waste products include discarded tires, plastic, glass, steel, burnt foundry sand, and coal combustion by-products (CCBs). Each of these waste products has provided a specific effect on the properties of fresh and hardened concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing disposal problems. Reuse of bulky wastes is considered the best environmental alternative for solving the problem of disposal. One such waste is plastic, which could be used in various applications. However, efforts have also been made to explore its use in concrete/asphalt concrete. The development of new construction materials using recycled plastics is important to both the construction and the plastic recycling industries. This paper presents a detailed review about waste and recycled plastics, waste management options, and research published on the effect of recycled plastic on the fresh and hardened properties of concrete. The effect of recycled and waste plastic on bulk density, air content, workability, compressive strength, splitting tensile strength, modulus of elasticity, impact resistance, permeability, and abrasion resistance is discussed in this paper.     

Scavenging demeanor in Bahawalpur,Pakistan: social and health perspective

Social and health issues are now considered as an integral part of waste management system. Scavengers or waste pickers are the main victims in waste management sector. Objective of the cross sectional study carried out for a group of scavengers living in huts was to highlight the socio-demographic characteristic, working conditions and occupational health risks with main emphasis on relation of infectious disease prevalence and waste picking activity in Bahawalpur area. Of the 100 waste pickers and 100 non-waste pickers HIV was not detected in any participant, HBV was detected in 4 and 2 % and HCV in 28 and 6 % respectively. Considerable differences were observed in the detection rates of HCV (OR: 6.09, 95 % CI 2.4, 15.5; p = 0.000) and either markers (OR: 5.4, 95 % CI 2.35, 12.5; p = 0.000) in waste pickers compared to general population. The higher incidence of Hepatitis among waste pickers compared to non waste pickers is a function of their occupation, unhygienic living conditions, lack of immunization, ignorance and need of training regarding waste handling.     

Properties of concrete containing scrap-tire rubber--an overview

Solid waste management is one of the major environmental concerns in the United States. Over 5 billion tons of non-hazardous solid waste materials are generated in USA each year. Of these, more than 270 million scrap-tires (approximately 3.6 million tons) are generated each year. In addition to this, about 300 million scrap-tires have been stockpiled. Several studies have been carried out to reuse scrap-tires in a variety of rubber and plastic products, incineration for production of electricity, or as fuel for cement kilns, as well as in asphalt concrete. Studies show that workable rubberized concrete mixtures can be made with scrap-tire rubber. This paper presents an overview of some of the research published regarding the use of scrap-tires in portland cement concrete. The benefits of using magnesium oxychloride cement as a binder for rubberized concrete mixtures are also presented. The paper details the likely uses of rubberized concrete.     

Bacterial reduction of selenium in coal mine tailings pond sediment

Sediment from a storage facility for coal tailings solids was assessed for its capacity to reduce selenium (Se) by native bacterial community. One Se(6+)-reducing bacterium Enterobacter hormaechei (Tar11) and four Se(4+)-reducing bacteria, Klebsiella pneumoniae (Tar1), Pseudomonas fluorescens (Tar3), Stenotrophomonas maltophilia (Tar6), and Enterobacter amnigenus (Tar8) were isolated from the sediment. Enterobacter hormaechei removed 96% of the added Se(6+) (0.92 mg L(-1)) from the effluents when Se(6+) was determined after 5 d of incubation. Analysis of the red precipitates showed that Se(6+) reduction resulted in the formation of spherical particles (<1.0 microm) of Se(0) as observed under scanning electron microscope (SEM) and confirmed by EDAX. Selenium speciation was performed to examine the fate of the added Se(6+) in the sediment with or without addition of Enterobacter hormaechei cells. More than 99% of the added Se(6+) (approximately 2.5 mg L(-1)) was transformed in the nonsterilized sediment (without Enterobacter hormaechei cells) as well as in the sterilized (heat-killed) sediment (with Enterobacter hormaechei cells). The results of this study suggest that the lagoon sediments at the mine site harbor Se(6+)- and Se(4+)-reducing bacteria and may be important sinks for soluble Se (Se(6+) and Se(4+)). Enterobacter hormaechei isolated from metal-contaminated sediment may have potential application in removing Se from industrial effluents.     

A Hydraulic MultiModel Ensemble Framework for Visualizing Flood Inundation Uncertainty

While deterministic forecasts provide a single realization of potential inundation, the inherent uncertainty associated with forecasts also needs to be conveyed for improved decision support. The objective of this study was to develop an ensemble framework for the quantification and visualization of uncertainty associated with flood inundation forecast maps. An 11‐member ensemble streamflow forecast at lead times from 0 to 48 hr was used to force two hydraulic models to produce a multimodel ensemble. The hydraulic models used are (1) the International River Interface Cooperative along with Flow and Sediment Transport with Morphological Evolution of Channels solver and (2) the two‐dimensional Hydrologic Engineering Center‐River Analysis System. Uncertainty was quantified and augmented onto flood inundation maps by calculating statistical spread among the ensemble members. For visualization, a series of probability flood maps conveying the uncertainty in forecasted water extent, water depth, and flow velocity was disseminated through a web‐based decision support tool. The results from this study offer a framework for quantifying and visualizing model uncertainty in forecasted flood inundation maps.     

A first approximation kinetic model to predict methane generation from an oil sands tailings settling basin

A small fraction of the naphtha diluent used for oil sands processing escapes with tailings and supports methane (CH(4)) biogenesis in large anaerobic settling basins such as Mildred Lake Settling Basin (MLSB) in northern Alberta, Canada. Based on the rate of naphtha metabolism in tailings incubated in laboratory microcosms, a kinetic model comprising lag phase, rate of hydrocarbon metabolism and conversion to CH(4) was developed to predict CH(4) biogenesis and flux from MLSB. Zero- and first-order kinetic models, respectively predicted generation of 5.4 and 5.1 mmol CH(4) in naphtha-amended microcosms compared to 5.3 (+/-0.2) mmol CH(4) measured in microcosms during 46 weeks of incubation. These kinetic models also predicted well the CH(4) produced by tailings amended with either naphtha-range n-alkanes or BTEX compounds at concentrations similar to those expected in MLSB. Considering 25% of MLSB's 200 million m(3) tailings volume to be methanogenic, the zero- and first-order kinetic models applied over a wide range of naphtha concentrations (0.01-1.0 wt%) predicted production of 8.9-400 million l CH(4) day(-1) from MLSB, which exceeds the estimated production of 3-43 million l CH(4) day(-1). This discrepancy may result from heterogeneity and density of the tailings, presence of nutrients in the microcosms, and/or overestimation of the readily biodegradable fraction of the naphtha in MLSB tailings.